Room 24

1.  Floor: 
a)  Add new layer.   Background, Styles, Marble sample, Scale 100, Angle 0,
flood fill screen. 
b)  Deformation tool, hold down ctrl key, use top left node and drag it to 
150 mark on your top ruler, release ctrl key.  Use the top middle node to
drag down to 300 mark on your left ruler.  Using the middle side nodes, 
stretch sideways.  Click arrow key to release deformation.
c)  Edit, copy, paste as new selection and place above previous section.
Deselect.   Save.

2.  Back Wall: 
Add new layer, Selections, load from disk, choose the tile sample, same settings,
flood fill.  Deselect.  Save.  The tile decoration will come later.

3.  Middle Wall: 
a)  Add new layer, Selection, load from disk, flood fill #F4F4F4.  Deselect.
b)  Foreground #E0E0E0, draw tool, straight line, width 2, start at 350 on
your top ruler and draw a straight line down the center.   Save.

4.  Spa: 
a)  Add new layer, Selections, load from disk, flood fill with marble sample.
b)  Colors, Adjust, Brightness/Contrast, 30, 0.  Deselect.   
c)  To give the spa depth, draw tool, size 2, #374D78, draw a line down the
center of the spa 75 pixels (or 3/4") long.  Save.

5.  Top Step:
a)  Add new layer, Selections, load from disk, flood fill, marble sample.
b)  Colors, Adjust, B/C, -30, 0.   Deselect.  Soften curves with the retouch
tool.  Move this layer below Bath Edge layer.

6.  Lower Step:
a)  Add new layer, Selections, load from disk, flood fill, marble sample. 
b)  Colors, Adjust, B/C, -30, 0.  Deselect.  Save.

7.  Spa Edge: 
a)  Add new layer, Selections, load from disk, flood fill #F4F4F4.
b)  Effects, Inner Bevel, same settings. Deselect.  Save.

8.  Windows: 
a)  Add new layer, Selections, load from disk, flood fill #374D78. 
b)  Effects, Inner Bevel, Round, Width 2, Smoothness 17, Depth 2, Amb. -8, 
Shininess 0, Color White, Angle 0, Intensity 50, Elevation 30.   Deselect.  Save.

9.  Window Glass: 
a)  Foreground #FFFFFF, Background C0C0C0, styles, background, gradient,
linear, edit, #1 Foreground-Background, angle 315, repeat 0, invert unchecked, OK.
b)  Add new layer, Selections, load from disk, flood fill with gradient.   Deselect.  
c)  Layer Palette, lower layer opacity to 30.  Save.

10.  Vanity Top: 
Add new layer, Selections, load from disk, flood fill, marble sample.  Deselect.

11.  Vanity Front: 
a)  Add new layer, Selections, load from disk, flood fill, marble sample.
b)  Colors, Adjust, B/C, 30, 0.  Deselect.  Save.

12.  Vanity Edging: 
Add new layer, Selections, load from disk, flood fill, #FFFFFF.  Deselect.

13.  Vanity Doors: 
a)  Add new layer, Selections, load from disk, flood fill, #FFFFFF.
b)  Effects, Inner Bevel, same settings.  Deselect.  Save.

14.  Mirror: 
a)  Foreground #FFFFFF, Background C0C0C0, styles, background, gradient,
linear, edit, #1 Foreground-Background, angle 315, repeat 3, invert unchecked,
b)  Add new layer, Selections, load from disk, flood fill with gradient.  Deselect.

15.  Mirror Frame: 
Add new layer, Selections, load from disk, Styles background, gold sample, 
Scale 100, Angle 0, flood fill.   Effects,  Sharpen.   Deselect.  Save.

16.  Door Knobs: 
a)  Add new layer, paintbrush tool, round, size 6, gold sample, Angle 315, 
paint dots.
b)  Selections, select all, magic wand, click inside marching ants.  
c)  Effects, Inner Bevel same settings.  Deselect.  Save.

17.  Vanity Sink: 
a)  Add new layer, foreground, gold sample, same settings, background #FFFFFF. 
b)  Preset shapes, Ellipse, Width 4, Antialias checked, draw a small oval.   
Edit, copy, paste as new selection.   Deselect.  Save.

18.  Shower Floor: 
Add new layer, Selections, load from disk, flood fill #C0C0C0.  Deselect.

19.  Shower Doors: 
Add new layer, Selections, load from disk, flood fill, gold sample, Angle 0. 
Deselect.   Soften curve with retouch tool.     Save.

20.  Shower Faucets: 
a)  Add new layer, paintbrush tool, round, size 10, gold sample, Angle 315,
paint the two taps.
b)  Selections, select all,  magic wand, click inside marching ant
c)  Effects, Inner Bevel same settings.  Deselect.  Save.

21.  Towel Rail: 
a)  Add new layer, Selections, load from disk, flood fill gold sample Angle 315.
b)  Effects, Inner Bevel same settings.  Deselect.  Save.

22.  Towel Rail Ends: 
a)  Add new layer, paintbrush tool, round, size 8, gold sample, same settings,
paint a dot at each end of the Towel Rail.	
b)  Selections, select all, magic wand, click inside marching ants.
c)  Effects, Inner Bevel same settings.  Deselect.

23.  Sink Faucet: 
a)  Open the image supplied, Edit, Copy, close small image, Edit, paste as new layer.
b)  Edit, paste as new selections, image, mirror.  Effects, Sharpen.   Deselect.   Save.

24.  Bath Faucet: 
Open the image supplied, Edit, Copy, close small image, Edit, paste as new layer.
Effects. Sharpen.   Save.

25.  Back Wall Decoration: 
a)  Highlight back wall.  Add new layer, text tool, Wingdings 2, (or your favorite)
'e' and 'f' lower case, Size 12, Bold, turn off Stroke,  Fill #374D78, floating and
Antialias checked.
b)  Type 'e', and starting on the left wall place it the first full tile on the
top left corner, deselect.
c)  Type 'f', and place it in the second tile, deselect.  Edit, copy, paste as
new selection, leaving one tile empty.   Edit, copy, paste as new selection again,
deselect.  
d)  Edit, copy paste as new selection (you will now have four sets) on right
back wall.  Edit, paste as new selection and place half way down right wall.  
Effects.  Sharpen.   Deselect.   Save.

26.  Middle Wall Decoration: 
a)  Highlight middle wall layer.  Add new layer.  Using the same font and color,
size 16, type  efefef. (no spaces)
b)  Place them above left window, Image, Rotate, right free 7, make sure
'all layers' box is unchecked.  Deselect.
c)  Edit, copy, paste as new selection, Image, Mirror.    Effects Sharpen.
Deselect.  Save.

Well done!   Now it's time to relax in nice deep bubble bath.  :)